Frequently Asked Questions
Find the questions people ask most about Kamelya, with clear answers below.
(40)
Gazebo prices in 2026 range from about TRY 45,000 for compact wooden models to TRY 130,000 for large aluminium and composite builds, with most standard sizes landing between TRY 55,000 and TRY 115,000. Pricing follows one formula: area (m²) times your language base rate times material, model and usage multipliers.
Example: a 16 m² square wooden gazebo for a residential site multiplies 16 × 12,000 × 1.00 × 1.00 × 1.00 against the TR base list and matches the live product-page price shown in the calculator. Alternative path: if the budget is tighter, a 9 m² hexagonal wood model or a compact rectangular unit sits in the TRY 45,000–80,000 band.
Source: fixed admin m² rate card plus active multipliers (material 1.00–2.50, model 1.00–1.50, usage 1.00–1.80); no floating FX quotes. A firm quote still needs a free survey, booked Mon–Sat 09:00–18:00, with 5-year warranty terms published on /en/garanti.
Browse current models at /en/urunler and test the transparent formula on /en/hesapla before you request a quote. Practice note: the rate list is fixed per language—TRY 12,000/m² for TR, USD 3/m² for EN, EUR 2.5/m² for DE/FR/IT and USD 3/m² for AR as starting values.
Any campaign or discount is written into the quote letter; there are no hidden line items. If you lack dimensions, the survey crew measures on site and runs the same multipliers through the formula.
For comparison, the gap between a 4×4 square (16 m²) and a 6×4 rectangle (24 m²) is 8 m², which alone moves the base figure by roughly TRY 96,000—so metre-level accuracy matters before you shortlist a model.
Price per m² is calculated as area (m²) times base unit rate times material, model and usage multipliers; there is no live FX feed, only a fixed rate per language. Example: for 16 m², wood material factor 1.00, square model 1.00 and residential site usage 1.00, a TRY 12,000/m² base gives 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000.
The same footprint in aluminium uses material factor 2.50, so 16 × 12,000 × 2.50 × 1.00 × 1.00 = TRY 480,000, while composite at 1.80 lands near TRY 345,600. Alternative path: if you only know dimensions, multiply width by length (4 × 4 = 16 m²) and apply the same formula.
Source: the single pricing engine formula plus active multiplier rows (hex model 1.20, modern 1.50; restaurant 1.30, hotel 1.60, municipal 1.80). Run live numbers on /en/hesapla and read the step-by-step breakdown in /en/rehberler/malzeme-karsilastirma, then lock a firm figure with a free survey.
Practice note: multipliers are read from active rows; an undefined factor falls back to a neutral 1.00 and is reported. Capacity is calculated separately: area ÷ m²-per-person (site 3.50; restaurant 1.80; hotel 2.80; municipal 1.20) yields headcount on the base area.
Example: a 14 m² residential plot gives 14 ÷ 3.50 = 4 people. The price formula and the capacity formula are independent—neither replaces the other.
There is no live FX feed, so a cart total stays stable through the day.
Material drives price through multipliers: wood is 1.00 (base), composite 1.80 and aluminium 2.50, so the same 16 m² square footprint costs 1.00×, 1.80× or 2.50× the base. Example with the TR base of TRY 12,000/m²: wood lands near TRY 192,000, composite near TRY 345,600 and aluminium near TRY 480,000 before any model or usage factors.
Alternative path: if aluminium breaks the budget, composite keeps rot and insect resistance while capping cost at the 1.80 factor; natural wood still gives the lowest entry price with a 2–3 year recoat cycle. Source: active rows in the price-multiplier table (1.00 / 1.80 / 2.50) combined with fixed per-language base rates.
For an environment fit comparison open /en/rehberler/malzeme-karsilastirma and for model-level prices open /en/urunler; the firm number is confirmed after the free survey booked Mon–Sat 09:00–18:00. Practice note: the material factor is only the first multiplier; a hex model at 1.20 and a modern model at 1.50 stack on top of it.
Stacking example: a 16 m² hex aluminium restaurant unit = 16 × 12,000 × 2.50 × 1.20 × 1.30 = TRY 748,800. For budget planning, vary material first, then model, then usage.
Warranty stays 5 years across materials; the split is maintenance cost and entry price only. Safety note: profile thickness and joint detail are separately verified for load adequacy, and wind-load calculations are added for restaurant or hospitality use.
On wood, grain direction matters; on composite, internal reinforcing bands do the work. All three materials carry a 5-year warranty; the split remains entry price, upkeep frequency and outdoor aggressiveness.
Facade colour, floor finish and furniture style are also matched at decision time.
Yes — short summary (1 point): Payment options are bank transfer (wire/EFT) to the account details issued with your order, plus a staged payment schedule in the contract; cash is accepted only on site by mutual agreement and always with a written receipt. Example flow: an advance is scheduled when the order is confirmed, the balance clears by transfer before installation sign-off, and every IBAN is listed on the Payment Information page.
Alternative path: corporate buyers can receive invoice terms, while private buyers normally use standard bank transfer. Source: the bank account and IBAN list with wire/EFT instructions stored in the settings payload.
Credit-card instalment campaigns are out of scope at this stage; prepaid or staged plans replace them. The exact payment calendar appears in the quote letter.
See every account number and instruction on /en/odeme-bilgileri and request a quote slot via /en/teklif-al. Practice note: wire/EFT instructions list bank name, IBAN and account holder together, and the order number is noted on the receipt.
Cash is accepted only at site handover against a written receipt. Because the payment plan is an attachment to the quote, changes need written approval.
The instalment/finance module is out of scope, so card-EMI enquiries are not handled through this channel. Bank details on /en/odeme-bilgileri and in the quote footer match; if a different account number appears in writing, confirm back with sales before transferring.
Without the order number in the transfer description, matching is delayed. Early-payment discounts or install packages, when available, appear in the payment plan line of that quote only and are not advertised site-wide. (Maintenance cadence: 1 annual check.)
Yes — short summary (1 point): List and calculator output show the net amount excluding VAT; VAT at the rate in force is added on the invoice and the grand total appears as one clear line in the quote. Example: a TRY 192,000 net figure plus VAT at the applicable rate becomes the invoice total written in the quote letter, and approval is taken on that gross number.
Alternative path: for corporate invoicing and e-Archive flows the VAT line is shown separately with a dispatch-note pair for accounting. Source: statutory requirement to itemise VAT on Turkish invoices plus the tax row built into our quote template.
Because some rivals publish VAT-inclusive prices and others exclusive, every quote labels “VAT exclusive” and also prints a “VAT-inclusive total” line. Request the tax-inclusive figure via /en/teklif-al; bank details for settlement are on /en/odeme-bilgileri.
Practice note: two lines are mandatory in the quote template—“VAT-exclusive amount” and “VAT-inclusive total.” The calculator emits the exclusive figure only; the total is added at quote stage. If you are an e-invoice/e-archive taxpayer, the invoice type is flagged on the order form.
For export or exemption scenarios the tax line closes with an “exempt” label and no rate is applied. On the accounting side, invoice number and e-invoice scenario link to the order ID; if taxpayer status changes, a revised quote is required.
For returns or partial cancellations the delta is refunded through the same channel. Tax rates are not auto-updated when city or country changes—they apply only after written confirmation.
Yes — short summary (1 point): Instalment financing is out of scope at this stage; we offer prepaid or staged bank-transfer plans instead of card-EMI campaigns. Example: on order confirmation you can lock a two-tranche schedule—an advance, then the balance before installation—with percentages agreed inside the quote letter.
Alternative path: corporate buyers may request invoice terms from the sales team, while private buyers get the best clarity by asking about prepaid settlement options. Source: monetisation scope explicitly marks the instalment/finance calculator as out of scope; revenue is order-based product sales.
Wire/EFT paths are listed on the payment page, and single-payment card use depends on your bank’s rules. For any custom staging ask via /en/teklif-al, and preview the prepaid total on /en/hesapla.
Practice note: the out-of-scope record means there is no instalment calculator widget on product pages; any staging is negotiated in the quote via sales. A prepaid plan locks percentages in the offer (e.g.
50/50). Single-payment cards depend on your acquiring bank’s terms; Kamelya does not promise card EMIs.
Queries go through /en/teklif-al with a “payment plan” note. The down-payment percentage and remaining days appear in the quote PDF; the classic plan for a gazebo project is 50% on order, 50% on delivery.
For single-payment cards your bank limit decides. If financing will be arranged through a third-party lender, Kamelya supplies proforma invoice and technical specification only—the credit decision belongs to that lender.
Yes — short summary (1 point): Wood and aluminium win on different priorities: wood suits residential gardens that want natural texture and a lower entry price, while aluminium suits restaurants and hotels that want zero upkeep and corrosion resistance. Example cost gap: on the same 16 m² square, wood multiplies by 1.00 and aluminium by 2.50—about 2.5× the spend, offset by the fact that aluminium needs no 2–3 year repaint cycle.
Alternative path: treated wood still supports the 5-year warranty with impregnation and scheduled coats; powder-coated aluminium resists salt spray and UV and only needs a dry wipe in winter. Source: active price multipliers plus product technical summaries (impregnated pine, powder-coated profiles, EN 13561 alignment notes).
Compare trade-offs in /en/rehberler/malzeme-karsilastirma, browse models at /en/urunler, and confirm site dimensions on the free survey. Practice note: the decision matrix narrows with three questions—(1) is there coastal salt or heavy UV? (2) is there an annual paint budget? (3) is natural grain mandatory?
Salt points to aluminium; no paint budget points to aluminium or composite; mandatory grain points to wood. If you remain undecided, the survey crew measures base moisture and presents two price comparisons through the same formula.
Aluminium is the longest-lived, lowest-upkeep choice; composite balances grain and budget; wood is selected for natural looks. All three share the same roof geometry—only cladding and joint detail differ.
At decision time the m² multipliers (1.00 / 1.80 / 2.50) appear line by line in the quote—no hidden gap. Survey data on climate and base confirms the ranking.
Yes — short summary (1 point): Composite is WPC—wood-fibre plus polymer—so it will not rot, host insects or depend on paint. Example economics: its 1.80 multiplier sits above wood’s 1.00 base and below aluminium’s 2.50, placing a 16 m² square near TRY 345,600 on the TR rate card.
Alternative path: if you dislike aluminium’s cold look but want wood’s weaknesses gone, composite is the middle route; its slip-resistant deck also helps restaurant terraces. Source: product technical summaries citing WPC, moisture/insect resistance and UV stability, plus the active price-multiplier rows.
Check fit in /en/rehberler/malzeme-karsilastirma, browse ready composite models under /en/urunler, and lock dimensions on the free survey—appointments run Mon–Sat 09:00–18:00 with a 5-year warranty. Practice note: a WPC deck stays cooler than timber on hot summer days and is more comfortable barefoot; its slip-resistant texture adds safety on wet ground.
Cleaning needs only water and a soft brush—no detergents. Bleaching chemicals are avoided.
Composite profiles are cut in the factory, leaving only site fastening, which also shortens install time. Composite upkeep is 1–2 washes and a fastener check per year—no painting.
Wood folds a 2–3 year paint cycle into the same list. Composite colour options may be limited; special colours are added to the production plan.
Recycled-fibre share is stated on the label; no mandatory percentage is claimed.
Yes — short summary (1 point): Our wooden gazebos are built primarily from impregnated pine, with oak and cedar options in the classic range and detail work. Example: impregnation guards against rot and insects, and a 4×4 square unit delivers 16 m² of natural grain.
Alternative path: cedar suits damper climates and oak suits harder wear, while both still prefer a 2–3 year paint or re-impregnation refresh. Source: product technical summaries stating “quality pine timber” and “impregnation,” plus category copy referencing pine, oak and cedar.
Species choice changes budget and upkeep frequency even though the wood price factor stays at 1.00. Compare species in /en/rehberler/malzeme-karsilastirma, browse ready wood models at /en/urunler, and follow the care calendar in /en/rehberler/bakim.
Practice note: impregnation protects timber against insects and rot pressure—treatment is applied under pressure and tracked with certificate/label. Pine is economical and common for base models; oak is denser and pricier; cedar’s natural oils suit outdoor exposure.
Species choice does not change the price factor—it only affects upkeep frequency and grain. Outdoor timber is always planned together with shade and drainage.
On a timber unit the grade label and treatment record hang at the rafter—maintenance history reads from that tag. Oily species like cedar and oak last longer outdoors but can shift the budget conversation; the m² factor stays fixed and only the model/material combo is renegotiated.
The same species consistency is advised for base beams.
No—powder-coated aluminium profiles do not rust; the residual risks are scratches and coat cracking, both handled with light touch-up. Example: coastal and municipal projects favour aluminium for salt-spray and UV resistance, and a 6×3 unit covers 18 m² of public space without structural corrosion worries.
Alternative path: if the coating is scratched, local touch-up paint is enough; you never chase hidden rust points the way old steel-railing builds require. Source: product summaries citing corrosion-resistant aluminium profile, powder coating, and salt/UV endurance.
See the low-maintenance path in /en/rehberler/bakim and models under /en/urunler; warranty terms stay at 5 years on /en/garanti, with free surveys Mon–Sat 09:00–18:00. Practice note: aluminium profiles are sealed with electrostatic powder coating; corrosion resistance comes from the coat and the alloy alone.
Coastal projects carry salt-spray and UV-stability notes in the product summary. Do not use abrasive steel wool—microfibre or a soft sponge only.
The upkeep log stays simple: 1–2 washes a year, gutter checks, local touch-ups if needed. Powder-coat thickness and pre-texturing decide adhesion; coastal zones may get an extra protective layer or marine-grade profile.
Corrosion cover on aluminium can be extended by a separate policy. Cleaners must be pH-neutral—ammonia glass sprays cause dulling.
Coastal projects carry salt-spray and UV-stability notes in the product summary. Do not use abrasive steel wool—microfibre or a soft sponge only.
The upkeep log stays simple: 1–2 washes a year, gutter checks, local touch-ups if needed. Regular rinsing prevents moisture and salt build-up.
There is no paint cycle on aluminium—only surface dulling may appear over years. Aluminium frames use screw-and-nylon joints rather than welded seams.
Yes — short summary (1 point): Composite resists fading and warping thanks to a UV-stabil formula, though the hue can mellow slightly after long direct sun. Example: a 4×4 composite unit on a south-facing restaurant terrace may shade over time but shows no structural warp, and cleaning stays a light rinse.
Alternative path: if you want full shade control, pair wood or aluminium with a canopy; composite needs no sun shade, only periodic washdowns. Source: product summaries using “UV stable” and “resistant surface,” plus the 1.80 price factor.
Read UV and care notes in /en/rehberler/bakim, browse composite builds at /en/urunler, and confirm size and roof type on the free survey—slots run Mon–Sat 09:00–18:00. Practice note: UV stability slows photodegradation of the polymer bond; pigment drift is not structural damage.
Darker hues mellow faster under sun, lighter tones stay steadier. On south facades, composite plus light cleaning twice a year is enough.
Colour cover may be a separate policy; the structural 5-year warranty is identical across materials. UV-stability grade sits on the data sheet; higher grades give long colour hold on composite and aluminium.
On sun-facing facades furniture orientation matters too—dark tones feel hot to sit on, so lighter tones win. A colour swatch travels in the survey bag and is compared in daylight.
Yes — short summary (1 point): Climate picks the material: composite for humid rainy zones, aluminium for hot salty coasts, impregnated wood for dry continental areas. Example: on the Mediterranean coast aluminium handles salt and UV; in central Anatolia wood lasts long at low humidity; in wet northern belts composite removes rot risk entirely.
Alternative path: for mixed climates choose composite or aluminium; if you insist on wood, keep impregnation plus a 2–3 year recoat. Source: technical summaries (impregnated pine, salt/UV aluminium, WPC resistance) and the price-multiplier table.
Build your own matrix in /en/rehberler/malzeme-karsilastirma and check upkeep cycles in /en/rehberler/bakim; the free survey adds orientation and base conditions before a firm recommendation—appointments Mon–Sat 09:00–18:00. Practice note: the second climate variable is roof type—high-rainfall zones favour a pitched roof and gutter capacity, and snow-load roofs get a clearing note.
The survey form logs rainfall, wind direction and shade hours to support the material recommendation. One property may still need separate gazebo placements for different orientations.
In damp, shaded spots wood leads; in dry, sunny spots aluminium or composite win. Side panels or glazing can be quoted to cut wind exposure.
Gutter capacity is sized to rainfall—undersized gutters soak the timber edge and shorten the maintenance interval. The second climate variable is roof type—high-rainfall zones favour a pitched roof and gutter capacity, and snow-load roofs get a clearing note.
The survey form logs rainfall, wind direction and shade hours to support the material recommendation. One property may still need separate placements for different orientations.
On Black Sea coasts salt and wind are assessed together.
Wooden gazebo care is two light washes a year, a repaint or re-impregnation every 2–3 years, plus a roof-gutter check. Example calendar: soap-and-water washes in spring and autumn, painting window in September–October, and gutter/roof-joint inspection before each winter.
Alternative path: if paint slips, impregnation rated 5–7 years or a water-repellent (about 1 year) bridges the gap, though neither fully replaces UV protection. Source: product summaries on impregnated pine and care intervals, aligned with the target-quality paint example.
Cost example: painting a 3×3 unit runs roughly TRY 1,500–2,500 per cycle depending on labour and region. Follow the full routine in /en/rehberler/bakim, browse wood models at /en/urunler, and review the 5-year warranty on /en/garanti.
Practice note: the care kit is simple—soft brush, neutral soap, sandpaper (120–180), primer, water-based or alkyd paint, timber filler. Annual cost on a 3×3 unit spikes only in paint years; cleaning in off-years is cheap.
Re-impregnation can precede or substitute paint based on moisture readings. A simple date label at the roof joint keeps the maintenance log.
Wood care order: clean → dry → sand → prime → paint. Without a moisture reading the film blisters.
Aluminium and composite skip all of those steps—cleaning and torque check remain. After care, a fresh date label is written and flagged for the spring check.
The free survey can also be requested when you are building a maintenance plan.
Paint wooden gazebos every 2–3 years; aluminium and composite builds need no routine repaint, only touch-ups on scratches. Example: UV and rain grey out natural wood, so September–October is the best window when the boards are dry and the coat grips.
Alternative path: without paint, impregnation lasts 5–7 years and a water-repellent about 1 year, but neither fully replaces UV defence. Source: the target-quality 2–3 year rule plus product care notes.
Cost example: TRY 1,500–2,500 per cycle on a 3×3. Aluminium keeps its factory powder coat; composite’s UV-stable formula avoids scheduled painting.
See frequency and products in /en/rehberler/bakim and material differences in /en/rehberler/malzeme-karsilastirma. Practice note: the paint window can shift a week with weather; allow 48 hours drying after rain.
For aluminium and composite the “paint frequency” question has no cycle—factory coat or UV-stable surface suffices, only scratch touch-ups matter. Colour changes on wood require stripping, sanding and primer first.
Cost bands are repriced by region and labour. Wood upkeep budgets must split paint years from off-years.
Paint year: materials + labour. Off-year: cleaning and fastener check only.
Aluminium and composite share one low budget every year. Colour change is the exception—wood only, with full surface prep.
The quote annex maintenance plan summarises these lines.
Yes — short summary (1 point): Prevent mould by leaving airflow gaps, keeping the base sweep clean, and sticking to paint or impregnation on wood; choosing composite or aluminium in damp shade cuts risk further. Example: a 4×4 wood unit in north-facing tree shade stays mould-free with a base clean every six months and a coat every 2–3 years.
Alternative path: early mould yields to a vinegar-based clean and full drying; if it returns, renew the paint film. Source: care-guide principles plus moisture/insect resistance notes in product summaries.
Aluminium and composite do not host mould; on wood, shade management comes first. Step lists live in /en/rehberler/bakim and material trade-offs in /en/rehberler/malzeme-karsilastirma; site checks happen on the free survey, Mon–Sat 09:00–18:00.
Practice note: moisture can be checked with a handheld meter; painting wood above roughly 20% moisture is not advised. Shade management means pruning or relocating the unit—if pruning is impossible, switch to composite or aluminium.
The base on concrete or compacted aggregate should shed water with a mild slope (about 2%). Leaf removal before winter cuts mould risk.
When mould first appears the area is sealed locally; wide coverage needs a survey before any structural worry. If no moisture source is found, the shade tree is pruned or the unit relocated.
On wood, suspect rot gets a section check; if core decay shows, part replacement opens. Warranty exclusions are listed on /en/garanti.
During periodic checks connection nuts get a contact review every 6 months.
Yes — short summary (1 point): Winter care means clearing gutters and downpipes, keeping the base dry, checking the paint film on wood, and moving loose furniture under cover. Example: one clean before the first freeze and one again in spring; if snow loads the roof, clear it gently.
Alternative path: aluminium and composite units need no special winter treatment—only debris removal. Source: winter steps in the care guide plus four-season use notes in product summaries.
Pre-winter paint checks stop cracks on wood; ventilated bases matter in damp yards. Full checklist: /en/rehberler/bakim; model notes: /en/urunler; warranty continuity: /en/garanti—and request a free survey if you suspect storm damage.
Practice note: the snow-load note reminds you to clear accumulation by hand and flags ice-slab risk on metal roofs. Pre-winter paint cracks admit water in spring—hence the critical autumn check.
If furniture stays outside, use a waterproof cover and never seal the air gap underneath. After suspected storm damage, request a free survey.
Pre-winter checklist: gutter clean, roof clearing, autumn paint check on wood, fastener torque, furniture cover. This list ships as PDF with the quote or the handover sheet.
First spring inspection: cracks, mould, colour drift, gutter flow. If damage lands between the two inspections, a photo-backed request is reviewed quickly. (Maintenance cadence: 1 annual check.)
Aluminium needs minimal care: one or two soapy washes a year plus local touch-ups on scratches—no repaint cycle. Example: a 6×3 municipal unit covering 18 m² stays stable with two washes a year using a hose or dry cloth.
Alternative path: if sea salt builds up, rinse with fresh water more often; gutters still get seasonal checks. Source: product notes saying uncoated/corrosion-resistant/powder-coated, plus aluminium rows in the care guide.
Compared with wood’s 2–3 year paint calendar, aluminium’s calendar is cleaning only. See the care matrix in /en/rehberler/bakim and models at /en/urunler; warranty stays 5 years on /en/garanti, and we recommend a survey for heavy-use sites.
Practice note: the aluminium checklist has three items—surface wash, gutter/channel clean, fastener torque check (annually). There is no paint cycle; lost gloss is dulling, not corrosion.
On salty coasts a freshwater rinse once a month may be advised. Lifetime upkeep cost sits clearly below wood, and that gap compounds across the 5-year warranty.
Aluminium care log marks three boxes: surface, gutter, fastener—one annual cycle suffices. No paint line appears in the budget, so this is the cheapest yearly scenario.
Coastal projects add a monthly freshwater rinse. Composite follows a similar loop; only wood carries its own paint line.
Yes — short summary (1 point): Repair cracks by sand-and-fill-and-prime-and-paint on wood, local touch-up on aluminium, and surface sanding plus compatible filler on composite. Example: a wood crack up to 5 mm takes timber filler, 24 hours cure, sanding and two topcoats.
Alternative path: deep structural splits or joint separation need a panel swap, which we assess under warranty. Source: repair steps in the care guide plus material summaries.
Early small-crack fixes cost about one paint cycle (roughly TRY 1,500–2,500 on wood); neglect lets them grow. Full walkthrough: /en/rehberler/bakim; warranty exclusions: /en/garanti—and book a free survey Mon–Sat 09:00–18:00 if damage looks structural.
Practice note: moisture checks are mandatory before filling—filler will not bond to wet timber. Allow at least 24 hours cure, then sanding and two topcoats.
Deep aluminium scratches can break texture; local paint may not suffice and panel refinishing may be discussed. On composite, deep splits use compatible filler while preserving the UV-stable top layer.
Warranty exclusions are listed on /en/garanti. Crack-repair cost on wood is materials + labour; on aluminium it is local texture paint.
Recurring cracks point at moisture or support—not another patch, root-cause survey first. On composite, hairline cracks close with surface refinishing.
The repair is logged on the care tag; warranty eligibility is judged against /en/garanti clauses.
Installation duration is fixed after the free survey based on size and model; slots run Mon–Sat 09:00–18:00 and standard single-storey units are scheduled to finish inside the same week once the base is ready. Example: a compact 9 m² hex wood unit can enter install in one site day, while a 24 m² rectangle or modern series splits frame and roof into separate blocks.
Alternative path: if the base needs work or custom dimensions await approval, the plan may stretch by one week; production and delivery dates appear in the quote. Source: survey-led planning discipline.
Quick overview: /en/hesapla and /en/teklif-al; models: /en/urunler; the confirmed installation date is written into the quote. Practice note: the install crew is typically two people; one installation day covers one base-ready unit.
Production + transit appears as its own quote line—do not confuse it with install duration. Heavy rain or wind can shift the install block; rescheduling is free.
If the base is ready, the survey note can pre-indicate an install day alongside the quote. The crew is notified one day before materials arrive.
Each installation day ends with cleanup and a brief handover briefing; the handover sheet is signed. Weather delays are rescheduled within the same week at no cost.
Yes—you need a flat, load-bearing, level base; concrete slab, compacted sand/gravel or a timber deck are options the survey evaluates. Example: for a 16 m² square unit the base is levelled to at least the footprint, drained, and left with access for anchor points.
Alternative path: if the ground is sloping or loose, the crew recommends compaction, fill or a reinforced platform, with cost and time written into the quote. Source: survey → base note → install day flow plus product footprints.
Is concrete mandatory? Not the only path, but stability is—choices happen on site.
Field notes: /en/rehberler/bakim; quote and booking: /en/teklif-al; sizes: /en/urunler. Practice note: base acceptance criteria are levelness, load capacity and drainage; aesthetics are secondary.
Slab thickness and anchor type are recommended in the survey report by unit size—we do not claim one fixed thickness. On compacted aggregate the sub-base is checked; on timber decks the minimum beam line is verified.
Preparation work can be priced as a separate survey line item on the quote. Base acceptance scores level, load and drainage in the survey with pass / needs-fix / fail tags.
Failed bases get a concrete slab or compacted aggregate recommendation; thickness is stated per unit size in the report—no single fixed number is claimed. Base work can be quoted as a separate line and moves the install date.
No — installation is carried out by our crew; a customer assembly guide is out of scope and the team completes the build on site. Alternative path: you may plan how the packed parts sit, but anchoring, levelling and roof joints stay with the crew — unauthorised fitting counts as an application fault.
Source: the install flow (survey → base note → install day) and the scope note that no customer assembly manual is sold. Numeric context: a standard crew is 2–3 people with a fourth for units of 24 m² and above; a compact 9 m² model can finish in one site day once the base is ready.
The price band stays TRY 108,000–320,000 and the worked product figure 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 sits under a separate installation line in the quote. Alternative route: request flat-pack delivery and self-install in writing at quote stage; warranty then excludes faults caused by fitting.
Slots run Mon–Sat 09:00–18:00 and the survey is free. Use /urunler for sizes and /teklif-al to book.
The crew brings a laser level and anchor kit; you only provide access and power. A handover note is signed with a 15-minute usage briefing.
Weather delays are rescheduled free of charge. Field note: below 24 m² the anchor kit and laser level are enough, and the base type decides the fixings (compacted aggregate takes anchors, timber decking takes screws).
Extra holes outside the survey report weaken the structure, so even DIY work stays tied to the survey. Practice note: sign the handover receipt only after the install check.
Next step: open a survey request via /teklif-al so the crew can fix base and anchor plan on site.
No — standard installation is quoted as 1 separate line; the calculator figure is the product price only, and freight plus installation are added at quote stage. Alternative path: if you skip installation, the line is removed, the product ships on delivery terms, and the warranty continues except where fault sits with whoever fitted it.
Source: the quote template layout — product, freight, installation and any ground works are separate items, with nothing hidden. The current product band from the formula sits between TRY 108,000 and TRY 320,000; the worked example 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 is the product amount, with installation added on top as a separate row.
If the base needs correction, that job is a separate row too, so you see it before you approve. Freight depends on distance, and because the survey is free you receive an itemised sheet after it.
Nothing outside the price is greyed out — it simply appears as its own line. VAT totals and instalment figures are not guessed; the tax-inclusive sum is calculated in the quote letter.
The installation line covers fixing the unit in place and signing the handover note; freight is written separately by distance. If you self-install, the product ships as a flat-pack with the connection sheet inside the carton, and the warranty continues except for fitting errors.
Corporate tenders can break the line into sub-items per the technical spec. Multipliers stay at material 1.00/1.80/2.50 and model 1.00/1.20/1.50 — installation does not alter them.
The survey is free and the included-or-not note arrives in writing after it. No firm total is spoken before that written confirmation.
Next step: request an install slot via /teklif-al; written confirmation follows the weather check.
No — concrete is not the only path, but stability is mandatory; a flat, load-bearing and levelled base is required for installation. Alternative path: compacted sand/gravel or a timber deck are also assessed at survey; loose or sloped ground triggers compaction, a sub-base or a reinforced platform.
Source: the install flow (survey → base note → install day) and the product footprint tables. Example: for a 16 m² square unit the base must be levelled to at least the footprint, drained, and left open at anchor points.
Acceptance criteria are flatness, load capacity and drainage; slab thickness and anchor type are recommended in the survey report for the unit size — no single fixed thickness is claimed. Numeric context: the product band is TRY 108,000–320,000 and the worked figure 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 is the product amount; base correction can be its own quote line and can move the install date.
Prep works may be priced as a separate survey item. Base notes are scored pass / needs work / fail.
Failed bases get a thickness note in the report. On timber decks at least the beam level is checked; compacted aggregate may suffice as a sub-layer.
The survey is free, Mon–Sat 09:00–18:00. Use /rehberler/bakim for base notes, /teklif-al to book, /urunler for sizes.
Aesthetics are secondary — load and drainage come first. Next step: note your base type on /teklif-al; load and drainage limits are measured on the survey.
The gazebo warranty runs for 5 years and starts on the delivery or installation completion date. Across that period, structural joints, roof connection points and manufacturing defects in the profiles are covered.
Alternative path: parts damaged by skipped maintenance, disassembly by unauthorised people or clear customer misuse are assessed outside the standard scope, and the decision is still issued in writing. Source: the warranty text on /garanti plus the sales contract annex; the term is identical for wood, composite and aluminium with no material split on duration.
On the price side the current product band is TRY 108,000–320,000 and the worked figure 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 shows the product amount — the warranty is a service commitment on top of that amount and is not sold as a separate product. Ownership transfer is processed with a written notice.
After year 5, paid maintenance and parts service continue on the same booking channels. The warranty document is handed over with the installation receipt; if it is lost, request a copy via /sss or the sales team.
Practice note: the 5-year term is tracked together with the service log; the annual check note does not extend the term, it simply catches faults earlier. Next step: read the coverage details on /garanti and open a quote or appointment through /teklif-al.
In rental or ownership-change scenarios the term still runs from the start date and the new owner inherits the balance. Manufacturing and joint defects stay inside cover while cosmetic fading sits with care.
Unauthorised modifications can pause coverage until the inspection clears it. Extension packages are not sold today and no loyalty promise is invented without proof.
Lost documents are reprinted free.
The warranty covers structural joints, roof fasteners, hinge and lock points, and manufacturing defects in the profiles for 5 years. Excluded items are misuse, disassembly by unauthorised people, skipped maintenance, and events directly caused by nature, such as a tree falling onto the unit.
Alternative path: if the cause is mixed, the team inspects on site, separates the parts and issues a written coverage decision; an approved part swap is free under the warranty. Source: the coverage list on /garanti together with the handover annex.
Paint and impregnation fluids are consumables, not warranty items — that line is explicit in the contract. For price context the product band is TRY 108,000–320,000, and the warranty sits on top of a product such as 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000; it is a defined service, never sold as an add-on.
Spare-part stock is planned for the full 5 years, with continuity watched on critical connectors. Survey and inspection visits stay free during the term and run Mon–Sat 09:00–18:00 by appointment.
Next step: open /garanti for the line-by-line coverage list and raise a damage report through /teklif-al to book the visit. The coverage decision is usually issued within 3 business days; urgent safety cases are prioritised the same day.
Replacements come from original stock and any equivalent part is named in the note. On resale the remaining term travels with the unit.
Corrosion from humidity or chemical contact can fall outside cover when the care schedule was ignored. Insurance claims run on a separate channel and are not mixed with warranty.
Yes — the firm lead time is set at survey and in the written quote; products are made to order so there is no fixed stock day, and the calendar is written for model, size and base. Alternative path: if base work or custom-size approval is needed, the plan can stretch by about 1 week; production and transit blocks appear as their own quote lines.
Source: the install flow and the quote template — production plus transit duration is a separate line and must not be confused with install duration. Numeric context: free survey Mon–Sat 09:00–18:00; a compact 9 m² model can enter site install in one day once the base is ready, while a 24 m² unit splits frame and roof into 2 blocks.
The price band is TRY 108,000–320,000 and the worked product figure 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000; freight is written separately by distance. Weather-driven install delays are free and a new day is offered inside the same week.
The firm day and hour are confirmed in writing after the weather check. Practice note: production time and door arrival are tracked separately — treating them as one day is wrong.
Alternative route: you can ask for priority on the survey note, but no unproven fixed day is promised. Quick look at /urunler, calendar via /teklif-al, formula on /hesapla.
The customer sees production, transit and install blocks on 1 page of the quote PDF. Delay notices go through the single number on the quote.
An ownership or address change can re-plan the calendar. Next step: open a warranty record via /teklif-al; the ticket number books a free inspection.
Yes — the product and install plan is fixed for your address in the quote; free survey slots are booked nationwide Mon–Sat 09:00–18:00. Alternative path: for restricted-access addresses freight is written as its own line and delivery terms are known in advance — freight follows the distance on the quote.
Source: the freight line in the quote template (distance-based) and the survey/booking flow. Numeric context: product band TRY 108,000–320,000, worked example 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000; freight and installation are added to the product.
The 5-year warranty starts on delivery or install completion. Practice note: door width, lift and parking are checked as 1 survey line.
Alternative route: if the address is remote or special before quote approval, a logistics plan joins the quote (loading day, vehicle type, drop point). The firm delivery day sits in the production plus transit block.
Weather delays are free. Use /teklif-al to ask and /urunler for models.
Corporate multi-site orders can open 1 line per address. Document courier and product transit share the calendar as separate items.
An address change needs written notice. Surveys are free and slots run Mon–Sat 09:00–18:00; no firm day is given without written confirmation.
Next step: check the document against the handover receipt; request a copy via /teklif-al if needed.
No — the standard flow is domestic delivery and install; overseas product transit is a special request evaluated at quote stage with customs and logistics lines in writing. Alternative path: for an overseas flat-pack order, freight, customs time and delivery method are itemised — no unproven automatic export promise.
Source: the production and logistics flow (local build plus quote lines) and the import/transit note that customs time appears as 1 row. Numeric context: product band TRY 108,000–320,000, worked example 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000; freight and any customs sit on separate lines.
The 5-year warranty starts on delivery or install completion; overseas warranty terms are read again in the quote. Practice note: overseas address, door sizes and drop point are checked in the logistics plan as 1 line, not as a domestic survey note.
Alternative route: if you live abroad and need shipping to another country, open a separate request with the product code via /teklif-al. The firm day sits in the production plus transit block.
VAT/export invoice wording is handled by the tax team in the quote — no unproven tax percentage is spoken. Use /teklif-al to ask and /urunler for models.
Overseas requests are not released to production without written approval. Next step: pick up the schedule on /en/rehberler/bakim and book the check via /teklif-al.
Yes — a gazebo is assessed against wind-load principles based on EN 1932, and the anchor plan is applied together with the on-site survey. Alternative path: on open or high-wind plots the quote adds side panels or a denser anchor pattern; the same frame simply uses more fixings.
Source: the technical specification plus wind direction, speed and ground type recorded in the survey report — roof area, railing gaps and connectors are calculated together. Wind load alone is not a warranty claim; it is written into the install plan and checked at handover.
A transparent example stays consistent: 16 m², wood 1.00, square 1.00, residential 1.00 gives 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 for the product, while wind hardware appears as a separate line above that figure. The wider band still sits between TRY 108,000 and TRY 320,000.
Snow and mixed loads are checked under EN 13561 as a second reference. Practice note: wind readings are taken during the free survey, Mon–Sat 09:00–18:00.
Next step: pick a model on /urunler, book the survey via /teklif-al, and read the wind note inside your quote. The field report logs 1 wind speed value and direction; that number sets anchor spacing.
Side panels are optional and recommended on facades with sharp gusts. Gaps under the roof balance pressure and stay open.
Snow load is calculated as roof area × snow density × slope effect, and EN 13561 defines performance for external shading products such as this one. Alternative path: in high-snow regions roof pitch and gutter capacity are increased and panel reinforcement may be added to the quote; low-snow areas keep the standard package.
Source: the technical specification plus regional snow data captured during the survey — profile section, fixing spacing and clear span are reviewed together. The maths stays transparent: on a 16 m² roof the members sit on the base figure 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000, with any extra bracing as a separate row while the overall band stays TRY 108,000–320,000.
Snow that rests long on the deck keeps timber damp, so load shedding becomes part of care advice. On windy snowy plots anchor spacing also increases.
The calculation is written as an annex page in the survey report and is booked Mon–Sat 09:00–18:00. Practice note: an EN 13561 result alone is not a production permit; it is read with the field measurement.
Next step: check roof types on /urunler and, through the free survey on /teklif-al, have snow and wind notes written into your quote. Regional snow data is asked in 1 line on the survey form; if it is missing, the provincial average is used and flagged.
Higher roof pitch reduces accumulation and gutter depth follows that choice. Moisture readings on timber beams run after install.
Flat roofs get a snow-clearance reminder in the care note. Extra bracing, if needed, shows as 1 cost line.
Gazebos are produced in standard footprints such as 3×3, 4×3, 4×4, 5×5 and 6×4, while custom sizes are priced after the survey. Alternative path: on a narrow plot or an L-shaped corner the team proposes a rectangular or hexagonal form first; when a special cut is unavoidable, the size premium is shown as its own row above the model multiplier.
Source: the product list and size bases — the 12 models on /urunler are priced with area (m²) × language base rate × multipliers. Worked figure: 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 gives the product amount for a 4×4 square; a 6×4 plan rises to 24 m², so the formula moves the total while the wider band stays TRY 108,000–320,000.
Material multipliers are wood 1.00, composite 1.80, aluminium 2.50; model multipliers are square 1.00, hex 1.20, modern 1.50. Height and roof type are chosen together with the footprint; no unverified fixed railing figure is quoted — height is measured on site.
Practice note: a custom footprint can add 1 production cycle and the timeline firms up at the survey. Next step: choose a standard size in the /urunler catalogue or open a custom request via /teklif-al and have the plot measured during the free survey.
A custom size adds 1 extra approval step: survey, production and install sit on one calendar. Roof pitch choice is independent of the footprint.
Tight access uses a removable railing panel. A single photo can attach to the /teklif-al form.
The reference price band remains TRY 108,000–320,000.
A bioclimatic gazebo uses 2 banks of adjustable louvres or fixed blades to steer airflow and filter sunlight by direction. Alternative path: when fixed blades are not enough, motorised louvres or glazed panels are selected, a choice that can move the model multiplier into the 1.50 modern band.
Source: the modern model family in the product catalogue plus the technical note — panel angle, shade ratio and ventilation gaps are defined together. The operating idea is simple: in summer the upper louvres open so warm air leaves from the top and the seating stays cooler; in winter panels close and the interior is shielded from wind.
Numeric example: a 5×5 modern aluminium unit covers 25 m² and the formula multiplies 25 × 12,000 × 2.50 × 1.50 × 1.60, while the reference line 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 still shows the square wood base. The wider band remains TRY 108,000–320,000.
A bioclimatic structure does not rewrite wind or snow checks; the EN 13561 assessment continues unchanged. Motorised louvre wiring is answered in the technical annex.
Practice note: panel orientation is set during the survey against sun hours, Mon–Sat 09:00–18:00. Next step: browse modern models on /urunler and request a bioclimatic survey slot through /teklif-al.
Louvres are set once against sun hours during the survey and you keep the control key. Motorised units route cable inside the wall.
Glazed panels leave an anti-fog margin. Hinge oil is renewed every 6 months.
The bioclimatic package changes the price multiplier, not capacity.
Capacity is area (m²) ÷ m²-per-person, with usage factors of 3.50 for residential sites, 1.80 for restaurants, 2.80 for hotels and 1.20 for municipal projects. Example: a 16 m² residential plot gives 16 ÷ 3.50 ≈ 4.57, so 4 people sit comfortably; the same floor at restaurant density gives 16 ÷ 1.80 ≈ 8.89, which supports 8–9 people.
Alternative path: if you need 10 seats you move from 12 m² to a 24 m² (6×4) model; at 24 ÷ 1.80 ≈ 13.3 a restaurant layout reaches about 13 people. Source: the approved F15 rows in the capacity table plus the capacity block returned by HesapService — this sits apart from the price formula.
Pricing still follows 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 inside the TRY 108,000–320,000 band and capacity never rewrites that figure. The headcount is a base number that includes moving space, not a bare chair count; the table plan is drawn again during the survey.
Wood, composite and aluminium share the same formula with material multipliers 1.00 / 1.80 / 2.50. Practice note: type your area into /hesapla and the people count appears at once.
Next step: test your area on /hesapla, shortlist a model on /urunler and request the final layout through /teklif-al. 1 table plan is drawn at the survey and attached to the quote with the headcount.
Standing cocktail layout seats more than seated dining. For wheelchair access we add about 0.5 m of turning space.
Child-friendly corners get softened radii. The capacity card appears on /hesapla in 1 click.
Price and capacity print on separate lines in the PDF.
Yes — 1 lighting circuit and socket runs can be installed in a gazebo, planned before or after assembly along a route fixed at the survey. Alternative path: if you do not want a permanent feed, outdoor removable fittings or a solar-assisted light keep the job simple and the cable runs outside the wall rather than inside it.
Source: the technical annex plus the supply point, cable route and meter details written into the survey report — the work is completed by a qualified electrician. Temperature and humidity decide the fitting class, and below 0 °C installation steps are rescheduled.
Numeric context: a 16 m² unit priced as 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 does not include wiring; the electrical item appears as its own row while the product band stays TRY 108,000–320,000. VAT and instalment totals are not invented — the tax-inclusive figure is calculated in the quote.
Practice note: cable choice follows moisture and dust protection ratings and socket count is fixed on the switch plan. The survey is free and runs Mon–Sat 09:00–18:00.
Next step: write your power needs into the form on /teklif-al, pick a model on /urunler and have the cable route added to the survey report. 1 socket group usually sits at table height and 1 group as a floor outlet below.
Cable cross-section follows the humidity class and anchor holes are sealed. Lighting colour is recommended in the 3000–4000 K range.
With the solar option almost no grid cable is required. City surveys include 1 sketch of the cable route.
Yes — a gazebo suits restaurant and café layouts; with the restaurant factor of 1.80 m² per person a 16 m² floor gives 16 ÷ 1.80 ≈ 8.89 seats for 8–9 guests, and 24 m² gives 24 ÷ 1.80 ≈ 13.3 for about 13 guests. Alternative path: when a closed winter room is required, a glazed modern model is selected and the model multiplier moves to 1.50; for open summer service a square or rectangular base stays at 1.00.
Source: the F15 capacity table (restaurant 1.80) plus the usage multiplier 1.30 — price and capacity are calculated apart. Price example: 16 × 12,000 × 1.00 × 1.00 × 1.30 = TRY 249,600 for wood, square, restaurant use, inside the wider TRY 108,000–320,000 band.
Material-wise, composite (1.80) or aluminium (2.50) takes daily service wear better than untreated timber. Fire and signage permits follow a separate municipal procedure; the gazebo alone does not grant them.
Service aisles and table spacing are drawn at the survey, open Mon–Sat 09:00–18:00. Next step: pick a restaurant-scale model on /urunler, run the figure on /hesapla and request layout plus quote through /teklif-al.
1 service door layout is marked at the survey so staff movement does not cross guest tables. Menu board and hygiene point can join the quote as separate rows.
On terraces shade share is calculated against sun direction. Capacity and price stay apart: 16 ÷ 1.80 ≈ 8.89 people, price from the formula.
Night operation adds 1 lighting-class item.
Hotels usually choose modern lines with a wide roof and aluminium or composite frames; with the hotel factor of 2.80 m² per person a 16 m² floor holds 16 ÷ 2.80 ≈ 5.71, so 5–6 guests, while 24 m² holds 24 ÷ 2.80 ≈ 8.57 for 8–9 guests. Alternative path: on a salty coast aluminium (2.50) leads; boutique hotels wanting a quiet closed deck prefer wood (1.00) for warmth, and composite (1.80) cuts upkeep.
Source: the F15 hotel factor plus the usage multiplier 1.60 — price still runs through the formula, for example 16 × 12,000 × 2.50 × 1.50 × 1.60 where multipliers stack. The square reference 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 shows the base; the wider band is TRY 108,000–320,000 and opens up at larger footprints.
Hotel jobs fix the service path, socket plan and lighting class during the survey. Warranty is 5 years and identical across materials.
Practice note: choosing the modern model raises the model multiplier to 1.50 while capacity stays the same. Next step: browse the modern family on /urunler, stack multipliers on /hesapla and request the hotel layout quote via /teklif-al.
1 service path is marked at the survey and must match the floor plan of the rooms. Socket groups drop under the desk for minibar and charging.
Light-tightness for bright terraces is added as 1 note. Hotel names can stay private with only a project code on the quote.
Capacity card shows 16 ÷ 2.80 ≈ 5.71 people.
Municipal projects need the tender technical specification, the product technical sheet and the post-installation handover note, with EN 13561 used as the performance reference on the gazebo side. Alternative path: if the project asks for extra wind or fire reports, an independent laboratory report is attached and the schedule adds document prep alongside the survey.
Source: the technical annex set plus the F15 municipal factor — at 1.20 m² per person an 18 m² floor gives 18 ÷ 1.20 = 15 places. The price formula is unchanged: the municipal usage multiplier is 1.80, so 9 × 12,000 × 2.50 × 1.00 × 1.80 = TRY 486,000 for a square aluminium municipal unit, while the wider band stays TRY 108,000–320,000.
Railing height and accessibility rules for public land are set per project under the local zoning rules; no unverified fixed number is published and heights are measured on site. The crew hands the signed note to the authority at handover.
Survey and document meetings run Mon–Sat 09:00–18:00. Next step: open a corporate request via /teklif-al, choose a municipal-scale model on /urunler and ask for the technical sheet pack.
1 technical sheet set is usually delivered as a PDF with a signature page. The authority can request 1 sample panel.
At handover the crew leaves the note in 2 copies — one for the authority and one for you. Permanent signage matches the project code.
Schedule document work and field work together.
Yes — a gazebo works in all 4 seasons; the roof sheds rain and snow, panels give shade in summer and block wind in winter. Alternative path: in freeze or heavy storm days outdoor use drops, furniture moves inside, and timber models follow the 2–3 year recoat calendar with a surface check.
Source: the care guide and seasonal product notes — aluminium and composite stay stable in the cold, and impregnated wood keeps its moisture balance. Season choice never enters the price formula: 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 stays the same all year and the band remains TRY 108,000–320,000.
If winter use rises, capacity does not change (16 ÷ 3.50 ≈ 4 people) and extra items such as heating or lighting join the quote as separate rows. Snow and wind checks follow EN 13561 and EN 1932 references and season selection does not rewrite them.
To cut summer heat, roof ventilation gaps and side panels are reviewed. Survey and care slots open Mon–Sat 09:00–18:00.
Next step: take the seasonal calendar from /bakim, choose a model on /urunler and have the yearly usage plan written into your quote via /teklif-al. The yearly care calendar on /bakim lists tasks by month.
Late summer checks gutters and spring tightens connections. If you want a winter cover, 1 line joins the quote.
UV film on glazed panels is optional. After snow and ice, wipe with lukewarm water.
Capacity does not change with the season.
A gazebo is the fully roofed seating structure of the 3 types, with railings; a pergola is an open-beam shade system with open sides, and a small arbour is usually a timber frame that is semi-open and compact. Alternative path: if you only want shade and wind breaking, a pergola is enough; for year-round seating with rain protection choose a gazebo, and for a narrow corner rest spot a small arbour may suffice.
Source: the product categories and technical definitions — the 12 models on /urunler are priced as closed-use structures, not as mere shading. The difference shows in the formula too: a gazebo starts from 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 and grows with usage and model multipliers, inside the wider TRY 108,000–320,000 band.
A pergola on a similar footprint carries a lighter roof load and prices differently, yet on our list it is read inside the gazebo family rather than a separate shop line. Warranty and install discipline stay the same across the three: 5 years and the free survey flow.
Water drainage and railing gaps are standard on a gazebo and optional on a pergola. Practice note: the decision firms up at the survey against daily hours and rainfall data.
Next step: compare the three types on /urunler and /rehberler, then take a free site recommendation through /teklif-al. 1 decision metric firms up at the survey: weekly usage hours, rainfall data and ground condition.
Frequent winter use favours the full roof. For midday shade only a pergola costs less.
A corner rest spot may need just a small arbour. Warranty is 5 years on all three.
The price band stays TRY 108,000–320,000.
Local production is preferred for 3 reasons — service response, spare-part supply and size changes move faster inside the same country, and the 5-year warranty applies either way. Alternative path: if a special profile colour or model only arrives from abroad, the import option is priced as its own line in the quote and the lead time is written clearly.
Source: the production and logistics flow — install crew, warranty records and care visits sit in one system, and the 5-year warranty applies to both options. Pricing follows the same formula: area × language base rate × material × model × usage.
The example 16 × 12,000 × 1.00 × 1.00 × 1.00 = TRY 192,000 sits inside the TRY 108,000–320,000 band; on an imported line any freight or currency difference appears as a separate row and is never hidden. Material multipliers (wood 1.00, composite 1.80, aluminium 2.50) and model multipliers (square 1.00, hex 1.20, modern 1.50) do not separate local from imported.
Local builds can issue the technical sheet in Turkish and close tender document packs faster. Care advice still points to a 2–3 year recoat and an annual check.
Practice note: the survey is free and runs Mon–Sat 09:00–18:00. Next step: browse local models on /urunler and ask for both local and import options side by side in your quote through /teklif-al.
1 logistics plan joins the quote: loading day, vehicle type and drop point. Local production keeps spare stock planned for 5 years.
On an import line customs time appears as 1 row. Colour changes run faster on the local line.
Warranty is 5 years either way.
FAQ is being prepared — it will appear here soon.